Toll-Free Customer Support 24/7

060G2850 MBD1000 Microprocessor Controlled Plug-in Display 4-20mA

Input signal                                      4 - 20 mA (2-wire)
Max. allowed input current            40 mA
Reverse voltage protection           Polarized installation
Voltage drop                                    Approx. 3 V
Display                                             10 mm high LCD-display
Display range                                  Start and end value freely programmable
Maximum display value                 9999
Minimum display value                  -1999
Decimal point                                  Any position
Measuring accuracy                       0.2% ± 1 digit
Temperature drift                           100 ppm / °C
Measuring interval                          Approx. 3 measurements / sec.
Filtering                                             Selectable in 3 stages
Nominal temperature                     25°C
Ambient temperature                     0 to 50°C
Humidity                                           0 to 80% RH (non condensing)
Electromagnetic compatibility      According to EN61000-6-2 and EN61000-6-3
additional error                               < 1%
Housing Dimensions                    ABS. Front screen made of polycarbonate 48.5 x 48.5 x 35.5 mm (L x W x D)
Connection                                      DIN 43650 adaptor
IP rating                                            IP65

  • Buy 3 for £155.38 (£186.46 incl. UK VAT) each and save 9%
  • Buy 6 for £141.26 (£169.51 incl. UK VAT) each and save 17%

Availability: See "Delivery Information" below

Excl. UK VAT: £169.51 Incl. UK VAT: £203.41
Category Overview

A microprocessor controlled plug-in display that can be universally applied to all MBS, AKS and MBT transmitters with a 4-20 mA output and DIN 43650 plug.
The Danfoss MBD 1000 is simply inserted between the transmitter and its connector by means of the integral DIN cubic plug adaptor.
Measurement range, decimal point and filtering can be comfortably adjusted with 3 push-button keys after removal of the front cover.
The display provides a simple and effective solution for local monitoring of pressure and temperature.
• Polarity protected
• No auxiliary energy source required
• Can be tilted to any position
• High accuracy and minimal temperature drift
• Easy installation
• Instant monitoring of transmitter
• CE approved

Back to top

Authorised Danfoss Technical Distributor